Retour / Go back

AALBORG INSTRUMENTS

20 CORPORATE DRIVE
ORANGEBURG NEW YORK 10962
ETATS UNIS
telephone : +1(0) 845 770 3000
fax : +1(0) 845 770 3010
web :www.aalborg.com
twitter
COMPANY PROFILE

AALBORG® Instruments, ISO 9001 certified since 1995, manufactures rotameters, mass flow meters and controllers, peristaltic pumps, optical sensor switches, and valves. The company  delivers high quality flow instrumentation and has  a reputation as one of the top manufacturers of precision flow control and measurement instrumentation.
The website is designed to provide information on all the products offered including  details and specifications needed to determine which flow meter, mass flow controller, rotameter, pump, or valve  is suitable for your application. In addition, AALBORG® has over two hundred  world-wide distributors to assist its customers.


Enhanced Optical Sensor Switches for Rotameters

Are you looking for a non-invasive way to detect high or low flow rates that can damage your equipment and processes? Aalborg® Instruments’ enhanced Optical Sensor Switches automatically solve the problem! Easy to operate, simply power up, slide and set the carrier with the set of self-contained miniature photoelectric sensors to monitor the desired level of flow.  An orange light signals that the float is in the desired position. Excellent for OEM applications, the enhanced sensors, consisting of transmitter and receiver, will signal a cut-off valve, alarm, or other device (not included) when the float passes above or below the desired setting. These versatile optical sensor switches can be used with Aalborg®’s P, S, and T rotameters. A kit is available for comparable flow meters.

Aalborg®’s Optical Sensor Switch Hi-Lo contains two sets of enhanced, self-contained mini-slim photoelectric sensors located on two solid carriers. Each set contains a transmitter and receiver. Perfect for OEM applications and a welcomed addition to your flow meter, use whenever maximum or minimum flow levels need to be automatically monitored. The Hi-Lo can also be used in conjunction with a control relay to power alternate equipment or monitoring devices.

Enhanced Sensor Switch Features :

  • Enhanced Sensor Switches with  one or  two rigid  carriers
  • Can be used in conjunction with a customer-supplied control relay to power alternate equipment or monitoring devices.
  • Works with all float materials including transparent red-colored floats made from sapphire due to the sensors’ enhanced design consisting of receiver and transmitter.
  • Response time: 0.5 MS.
  • Sensors are compactly designed and easy to operate.

SMV Valves for Hi Flow Liquid or Gas Regulation

Aalborg® Instruments’ 316 stainless steel or aluminum high precision two-way metering Stepping Motor Valves provide unparalled resolution and precision in controlling flow rates 0.00025” per step resolution (standard) or 0.000125” (optional). The Low differential pressure valves can be used continuously (100% duty cycle and stay in position as when de-energized). After powering up, the valve will automatically be closed within the first 10 seconds. It then resumes control operation. The “D” connector supplies the operating power and valve control signals. Aalborg®s high precision two-way metering valves are available for air/water.
Stepping Motor Valve Advantages over Solenoid Valves:

  • Continuous cool operation
  • No control operating problems due to coils heating up
  • Extremely fine resolution
  • Very low differential pressures and high operating pressures
  • Valves  are controllable by  CMOS 12 Vdc compatible logic level and analog 0 to 2.5 Vdc signals

 

 

Founded in 1972, Aalborg Instruments, ISO 9001:2008 certified, is known globally as a leading manufacturer of precision flow measurement and control instrumentation.

Product lines include Mass Flow Meters and Controllers, Paddlewheel Meters, Rotameters, Peristaltic Pumps, Valves, and Flow Accessories.

All products are made, serviced, and NIST traceably calibrated on Aalborg®’s premises.

Products are ideal for process, laboratory, and OEM applications.

Experienced technical representatives and world-wide distributors are available to answ
er questions and discuss your individual application requirements.

 

 
Contacts :
french distributor : Gulzira Mindina
Tel.: 1.845.770.3024 Fax: 1.845.770.3029


Horaires et jours d'ouverture :
Monday Friday 8 AM - 6 PM USA East Coast time


Documents PDF en téléchargement
Rotameter Catalog
Mass Flow Catalog
Pump Catalog


La nomenclature de
AALBORG INSTRUMENTS :

calibration (prestation) - calibration services
commutateurs capteurs optiques - optical sensor switches
débitmètres - flowmeters
débitmètres acier inox - Stainless Steel Flow meters
débitmètres analogiques - Digital Mass Flow controllers
débitmètres industriels - Industrial Flow meters
débitmètres lecture directe - Direct reader Flow meters
débitmètres numériques - Digital Flow meters
débitmètres PTFE - PTFE Flow meters
doseurs gas - Gas proportioners
facteurs de conversion - Conversion factors
mass flow meters / controllers - mass flow meters / controllers
métrologie - calibration - metrology - calibration
pompes péristaltiques - peristaltic pumps
rotamètres - rotameters
soupapes - barstock valves
soupapes moteur pas à pas - Stepping motor valves
valves - valves
vannes pointeau PTFE - PTFE needle valves
vortex flow meters - vortex flow meters



Close
Vous avez déjà effectué des demandes sur laboratoire.com
Vos coordonnées seront préremplies en vous identifiant avec

C'est votre première demande sur laboratoire.com
Veuillez saisir vos coordonnées (les champs marqués d'un * sont obligatoires ) :

 

AALBORG INSTRUMENTS
twitter
telephone : +1(0) 845 770 3000
web :www.aalborg.com
Contacter la société
en cliquant ici 
COMPANY PROFILE

AALBORG® Instruments, ISO 9001 certified since 1995, manufactures rotameters, mass flow meters and controllers, peristaltic pumps, optical sensor switches, and valves. The company  delivers high quality flow instrumentation and has  a reputation as one of the top manufacturers of precision flow control and measurement instrumentation.
The website is designed to provide information on all the products offered including  details and specifications needed to determine which flow meter, mass flow controller, rotameter, pump, or valve  is suitable for your application. In addition, AALBORG® has over two hundred  world-wide distributors to assist its customers.
 


Enhanced Optical Sensor Switches for Rotameters

Are you looking for a non-invasive way to detect high or low flow rates that can damage your equipment and processes? Aalborg® Instruments’ enhanced Optical Sensor Switches automatically solve the problem! Easy to operate, simply power up, slide and set the carrier with the set of self-contained miniature photoelectric sensors to monitor the desired level of flow.  An orange light signals that the float is in the desired position. Excellent for OEM applications, the enhanced sensors, consisting of transmitter and receiver, will signal a cut-off valve, alarm, or other device (not included) when the float passes above or below the desired setting. These versatile optical sensor switches can be used with Aalborg®’s P, S, and T rotameters. A kit is available for comparable flow meters.

Aalborg®’s Optical Sensor Switch Hi-Lo contains two sets of enhanced, self-contained mini-slim photoelectric sensors located on two solid carriers. Each set contains a transmitter and receiver. Perfect for OEM applications and a welcomed addition to your flow meter, use whenever maximum or minimum flow levels need to be automatically monitored. The Hi-Lo can also be used in conjunction with a control relay to power alternate equipment or monitoring devices.

Enhanced Sensor Switch Features :

  • Enhanced Sensor Switches with  one or  two rigid  carriers
  • Can be used in conjunction with a customer-supplied control relay to power alternate equipment or monitoring devices.
  • Works with all float materials including transparent red-colored floats made from sapphire due to the sensors’ enhanced design consisting of receiver and transmitter.
  • Response time: 0.5 MS.
  • Sensors are compactly designed and easy to operate.
 

SMV Valves for Hi Flow Liquid or Gas Regulation

Aalborg® Instruments’ 316 stainless steel or aluminum high precision two-way metering Stepping Motor Valves provide unparalled resolution and precision in controlling flow rates 0.00025” per step resolution (standard) or 0.000125” (optional). The Low differential pressure valves can be used continuously (100% duty cycle and stay in position as when de-energized). After powering up, the valve will automatically be closed within the first 10 seconds. It then resumes control operation. The “D” connector supplies the operating power and valve control signals. Aalborg®s high precision two-way metering valves are available for air/water.
Stepping Motor Valve Advantages over Solenoid Valves:

  • Continuous cool operation
  • No control operating problems due to coils heating up
  • Extremely fine resolution
  • Very low differential pressures and high operating pressures
  • Valves  are controllable by  CMOS 12 Vdc compatible logic level and analog 0 to 2.5 Vdc signals
 

 

 

  Founded in 1972, Aalborg Instruments, ISO 9001:2008 certified, is known globally as a leading manufacturer of precision flow measurement and control instrumentation.

Product lines include Mass Flow Meters and Controllers, Paddlewheel Meters, Rotameters, Peristaltic Pumps, Valves, and Flow Accessories.

All products are made, serviced, and NIST traceably calibrated on Aalborg®’s premises.

Products are ideal for process, laboratory, and OEM applications.

Experienced technical representatives and world-wide distributors are available to answ
er questions and discuss your individual application requirements.
 
     

 

895 visites depuis 16 octobre 2016